Release notes and older firmware versions. Unless instructed otherwise, it is always recommended to use the latest firmware version.

Trinity-200/300 TDD 1.4.1.1 - 2011-11-29Download (2.91 MB)

Trinity-200/300 TDD 1.4.1.0 - 2011-11-16Download (2.91 MB)

• The web interface displays RSSI per chain.
• Wrong clock rate caused distance calculations to be wrong at large values.
• The unit could fail to re-connect to Repeatit Network if nameservers were unreachable.
• Improved fixed radio rate operation.
• The unit could fail to select a new channel when switching between auto indoor and auto outdoor.
• The radio bandwidth limitation feature could result in that no traffic passed through the link.

Trinity-200/300 TDD 1.4.0.1 - 2011-10-03Download (2.90 MB)

• Support for Trinity-300 TDD
• Repeatit Cloud Network communication improvements.

Trinity-200/300 TDD 1.4.0 - 2011-09-01Download (2.90 MB)

• Support for Trinity-323/P.
• Configurable Ethernet speed for Trinity-300 Series.
• Fine grain bandwidth limitation support, allows more precise control of how much real throughput that is allowed over the radio.

Trinity-200 TDD 1.3.3 - 2011-08-19Download (2.89 MB)

• 10MHz channel bandwidth did not work properly.
• Minor web interface fixes. Select location button did not work properly in certain browsers. The firmware upgrade could get stuck if the upload failed.

Trinity-200 TDD 1.3.2 - 2011-08-01Download (2.89 MB)

• The unit could fall back to auto channel selection upon boot when using a non-ETSI regulatory domain.

Trinity-200 TDD 1.3.1 - 2011-07-06Download (2.89 MB)

• Multiple web interface fixes for Internet Explorer.
• Repeatit Network interface and communication improvements.
• Fix for unnecessary link disconnection. The link could disconnect during apply even if no radio related parameter had been changed.
• Improved icons for the web interface.

Trinity-200 TDD 1.3.0 - 2011-06-22Download (2.88 MB)

• Support for Repeatit Network - free cloud based management system.
• Repeatit Long Range Extension for Trinity 200 TDD. Improves noise immunity and bi-directional throughput over long links (~10km).
• STP (Spanning Tree Protocol) support have been added.
• DNS server configuration support.
• NTP support for unit clock synchronization.
• Interactive map in the web interface for easier longitude/latitude coordinate selection.
• All web interface field entries are now completely UTF-8 safe.
• Channel selection list could be wrong when running with a non-ETSI regulatory domain together with the RCS.

Trinity-200 TDD 1.2.4 - 2011-05-12Download (2.86 MB)

• SNMP support for monitoring purposes.
• Multiple status page improvements. A new counter has been added that shows the amount of bytes sent/transmitted over the radio. Counters does now display the current throughput per second in addition to their absolute values.
• RCS status is now displayed on the status page.
• RCS communication improvements; communication could fail to restart after being stopped.
• The absolute signal level displayed on the status paged showed the wrong value. Note, the displayed RSSI value was correct.
• The Repeatit Discovery Client could fail to detect a Trinity unit when configured to use VLAN.

Trinity-200 TDD 1.2.3 - 2010-12-03Download (2.64 MB)

• RCS statistics were not recorded properly.
• The web interface could in certain circumstances fail to show the "Save to flash" button.

Trinity-200 TDD 1.2.2 - 2010-11-09Download (2.64 MB)

• Antenna selection for dual polarized antennas with the purpose of disabling either the horizontal or vertical polarization did not work as expected.
• Antenna selection is now displayed as horizontal/vertical for units with built-in antennas.

Trinity-200 TDD 1.2.1 - 2010-11-03Download (2.64 MB)

• Initial Trinity-200TDD release.
• Major performance enhancements that increase the number of pps and radio throughput.
• Stability improvements; An extremley overloaded link could cause the unit to reboot.
• Password fields in the web interface are now correctly masked.
• A unit in master mode could fail to select a channel if auto selection outdoor/indoor was selected together with a regulatory domain that didn't have any outdoor nor indoor channels.
• RCS communication improvements; A unit could fail to (re-)connect to the RCS due to communication problems even though the unit was up, resulting in the RCS marking the unit as down.
• The virtual LEDs in the web interface sometimes failed to render properly.
• JavaScript fixes for Internet Explorer.
• An entry that shows link uptime has been added to the status page.
• TX rate is now shown by default on the status page.