Firmware for the revision 4 and 2 of SU541x/SU551x/SU241x/SU2510 series. Contact
Den här e-postadressen är skyddad från spamrobotar. Du måste tillåta Javascript för att visa e-postadressen
if your model is missing here.
SU5510A-r4
- SU5510A-r4 1.5.5.4 - 2011-10-31Download (3.54 MB)
- Varios changes in noise calibration routines, improves stability.
- Varios fixes in BS-SU communication protocol improve protocol stability.
- Various fixes in handling Clients PowerSave functionality.
- Resolved a stack problem, stack to small in some cases, could cause a reboot of unit.
- SU5510A-r4 1.5.3.2 - 2011-07-25Download (3.58 MB)
- Corrected a bug causing the "Active Scan" not to show up in the webinterface.
1.5.3.1- Corrected a bug causing the apply button not to work on network tab.
1.5.3.0- Adjusted the calibration routine.
- Improved SW watchdog, handles lost beacons better.
- Allow RCS to handle SU settings.
- Changed how the DHCP server setup the address range, now follows the LAN address better.
- Added a delay before reading back the scan result when doing a SiteSurvey. Solves a problem where not all SSIDs where presented.
- SU5510A-r4 1.5.2.8 - 2011-04-19Download (3.58 MB)
- Increased number of channels reported, not all channels where reported when using 11ABG radiocards.
- Fix a problem in prioritization, DiffServe setting for Voice queu was wrong.
- Corrected a problem with CCMP replay check. Sequence numbers could sometimes be wrong.
- Varios stability issues resolved.
- Adjust QoS (WME) settings for better performance.
- Improve scanning.
- Bandwidth settings was not applied correctly.
- Adjust antenna choice.
SU5511-r4
- SU5511-r4 1.5.5.4 - 2011-10-31Download (3.54 MB)
- Varios changes in noise calibration routines, improves stability.
- Varios fixes in BS-SU communication protocol improve protocol stability.
- Various fixes in handling Clients PowerSave functionality.
- Resolved a stack problem, stack to small in some cases, could cause a reboot of unit.
- SU5511-r4 1.5.3.2 - 2011-07-25Download (3.58 MB)
- Corrected a bug causing the "Active Scan" not to show up in the webinterface.
1.5.3.1- Corrected a bug causing the apply button not to work on network tab.
1.5.3.0- Adjusted the calibration routine.
- Improved SW watchdog, handles lost beacons better.
- Allow RCS to handle SU settings.
- Changed how the DHCP server setup the address range, now follows the LAN address better.
- Added a delay before reading back the scan result when doing a SiteSurvey. Solves a problem where not all SSIDs where presented.
- SU5511-r4 1.5.2.8 - 2011-04-19Download (3.58 MB)
- Increased number of channels reported, not all channels where reported when using 11ABG radiocards.
- Fix a problem in prioritization, DiffServe setting for Voice queu was wrong.
- Corrected a problem with CCMP replay check. Sequence numbers could sometimes be wrong.
- Varios stability issues resolved.
- Increased number of channels reported, not all channels where reported when using 11ABG radiocards.
- Fix a problem in prioritization, DiffServe setting for Voice queu was wrong.
- Corrected a problem with CCMP replay check. Sequence numbers could sometimes be wrong.
- Varios stability issues resolved.
- Adjust QoS (WME) settings for better performance.
- Improve scanning.
- Bandwidth settings was not applied correctly.
- Adjust antenna choice.
- SU5511-r4 1.5.2.4 - 2011-01-13Download (3.58 MB)
RECALLED because of reported connection problems.- Adjust QoS (WME) settings for better performance.
- Improve scanning.
- Bandwidth settings was not applied correctly.
- Adjust antenna choice.
SU5510A-r2
- SU5510A-r2 1.4.4.6 - 2010-03-25Download (3.94 MB)
SU5410A-r2
- SU5410A-r2 1.4.4.3 - 2009-09-24Download (3.94 MB)
SU5411-r2
- SU5411-r2 1.4.4.3 - 2009-09-24Download (3.94 MB)
SU5511-r2
- SU5511-r2 1.4.4.6 - 2010-03-25Download (3.94 MB)
SU2410BG-r2
- SU2410BG-r2 1.4.4.3 - 2009-09-24Download (3.94 MB)
SU2411-r2
- SU2411-r2 1.4.4.3 - 2009-09-24Download (3.94 MB)
SU2510bg-r2
- SU2510bg-r2 1.4.4.6 - 2010-03-25Download (3.94 MB)
SU2510bg-r4
- SU2510BG-r4 1.5.5.4 - 2011-10-31Download (3.54 MB)
- Varios changes in noise calibration routines, improves stability.
- Varios fixes in BS-SU communication protocol improve protocol stability.
- Various fixes in handling Clients PowerSave functionality.
- Resolved a stack problem, stack to small in some cases, could cause a reboot of unit.
- SU2510BG-r4 1.5.3.2 - 2011-07-25Download (3.58 MB)
- Corrected a bug causing the "Active Scan" not to show up in the webinterface.
1.5.3.1- Corrected a bug causing the apply button not to work on network tab.
1.5.3.0- Adjusted the calibration routine.
- Improved SW watchdog, handles lost beacons better.
- Allow RCS to handle SU settings.
- Changed how the DHCP server setup the address range, now follows the LAN address better.
- Added a delay before reading back the scan result when doing a SiteSurvey. Solves a problem where not all SSIDs where presented.
- su2510bg-r4 1.5.2.8 - 2011-06-01Download (3.58 MB)
- Increased number of channels reported, not all channels where reported when using 11ABG radiocards.
- Fix a problem in prioritization, DiffServe setting for Voice queu was wrong.
- Corrected a problem with CCMP replay check. Sequence numbers could sometimes be wrong.
- Varios stability issues resolved.
- Adjust QoS (WME) settings for better performance.
- Improve scanning.
- Bandwidth settings was not applied correctly.
- Adjust antenna choice.