Release notes and older firmware versions. Unless instructed otherwise, it is always recommended to use the latest firmware version.

BS-200Series Dual Radio

BS-222/242 1.5.5.4 - 2011-10-31Download (3.63 MB)

• Varios changes in noise calibration routines, improves stability.
• Varios fixes in BS-SU communication protocol improve protocol stability.
• Various fixes in handling Clients PowerSave functionality.
• Resolved a problem when building AMSD aggregated frames, could cause a reboot of the unit.
• Resolved a stack problem, stack to small in some cases, could cause a reboot of unit.
• Added Radius support
• Added possibility to force a SSID to specific VLAN.
• Added BS120 support

BS-222/242 1.5.3.0 - 2011-07-07Download (3.59 MB)

• Adjusted WMM settings
• Adjusted beacon interval, improved stability
• Adjusted the calibration routine.
• Added a sensitivity parameter, cuts off signals below sensitivity level.
• Improved SW watchdog, handles lost beacons better.

BS-222/242 1.5.2.8 - 2011-04-13Download (3.59 MB)

• Increased number of channels reported, not all channels where reported when using 11ABG radiocards.
• Fix a couple of wrongly reported settings to RCS, caused the RCS to warn for miss configuration.
• Fix for a problem where BS could stop communicating with RCS.
• Fix for a problem where the BS could reboot if RCS server was stoped.
• Fix a problem with AP_bridge setting. Two SUs connected to same radio interface could not communicate even if allowed to.
• Fix a problem in prioritization, DiffServe setting for Voice queue was wrong.
• Corrected a problem with CCMP replay check. Sequence numbers could sometimes be wrong.
• Various stability issues resolved.
• Adjustment of the default WMM settings. Improves performance.

BS-222/242 1.5.2.4 - 2011-01-17Download (3.59 MB)

• Reading SNMP network interface information could cause traffic to stop on the radio interface.
• Improve scanning, SSIDs was missing in the result.
• "Flood unknown" could cause crash or other unwanted behavior.
• Fix a Memory leak when connecting to RCS server.
• Fix the statistics when counting 11N Aggregated frames.
• Fix a bug where a interface in Client mode used only one stream eaven if two streams was available.
• Adjust QoS settings to improve performance for 11AG clients.

BS-222/242 1.5.2.2 - 2010-11-30Download (3.59 MB)

• Fix some problems with reporting statistics to RCS.
• Fix a connection problem affecting second radio only.

BS-200Series Single Radio

BS-220-240 1.5.5.4 - 2011-10-31Download (3.63 MB)

• Varios changes in noise calibration routines, improves stability.
• Varios fixes in BS-SU communication protocol improve protocol stability.
• Various fixes in handling Clients PowerSave functionality.
• Resolved a problem when building AMSD aggregated frames, could cause a reboot of the unit.
• Resolved a stack problem, stack to small in some cases, could cause a reboot of unit.
• Added Radius support
• Added possibility to force a SSID to specific VLAN.
• Added BS120 support

BS-220-240 1.5.3.0 - 2011-07-07Download (3.59 MB)

• Adjusted WMM settings
• Adjusted beacon intervall, improved stability
• Adjusted the calibration routine.
• Added a sensitivity parameter, cuts off signals below sensitivity level.
• Improved SW watchdog, handles lost beacons better.

BS-220-240 1.5.2.8 - 2011-04-13Download (3.59 MB)

• Increased number of channels reported, not all channels where reported when using 11ABG radiocards.
• Fix a couple of wrongly reported settings to RCS, caused the RCS to warn for miss configuration.
• Fix for a problem where BS could stop communicating with RCS.
• Fix for a problem where the BS could reboot if RCS server was stoped.
• Fix a problem with AP_bridge setting. Two SUs connected to same radio interface could not communicate eaven if allowed to.
• Fix a problem in prioritization, DiffServe setting for Voice queu was wrong.
• Corrected a problem with CCMP replay check. Sequence numbers could sometimes be wrong.
• Varios stability issues resolved.
• Adjustment of the default WMM settings. Improves performance.