Subscriber units

Infinity Subscriber Unit Support

SU100 Series

Current Version
Latest version 1.5.8.17 (2016-01-12)

Download SU-100 version 1.5.8.17

  • Fixed a problem in using all available channels in 6.4 GHz version.
SU-100 1.5.8.14 (2015-11-04)

Download SU-100 version 1.5.8.14

  • Fixed a text typo in the login-window.
SU-100 1.5.8.13  (2015-07-09)
  • Fixed a bug with the txpower drop down menu in web interface
  • Added Indonesia country code.
SU-100 1.5.8.11   2015-06-18
  • Changed queue size of ethernet interface, could cause reboot at very high load.
  • Corrected a bug that could cause disruption in traffic over radio interface, disruption could continue for 1-5min with out notice in
  • BS or SU.
  • Added more country codes.
SU-100 1.5.8.7   2013-11-12
  • Fix some problems with scanning.
  • Fix a bug when checking radio card type, could lead to a reboot, .
  • Added support to handle 3.5GHz radios.
  • Enable the use of reset button
  • Added a ping watchdog.

 

SU-100 1.5.8.2   2013-11-12
  • Fix some problems with scanning.
  • Fix a problem when SU is running in bridge mode with QinQ traffic.
  • Changed how radio cards are identified.
  • Added possibility to set channel separation.
  • Added support for Russia.

 

SU-100 1.5.7.5 – 2013-04-19
  • Fix some problems with scanning.

 

SU-100 1.5.7.1 – 2013-02-18
  • Added ATPC(AutomaticTransmitPowerControl).
  • Added support for 5 and 10MHz channels.
  • Added functions to support public safety 4.9GHz band in the future.
  • Increased the number of parameters that are configurable through the RCS. DATA_VLAN, network mode, wan ip settings.
  • Added ethernet port statistic in web interface.
  • Added possibility to set a fix ethernet speed Auto/10/100/1000 Mbit.
  • Added support for 5.9GHz radio cards
  • Improved DFS, lower the number of false detects.
  • Added support for Brazil
  • Adjusted the cts timeout value
  • Changed the default Bridge mode to Transparent from MAC-NAT
  • Fix a problem when using WPA, with many possible channels the CPE could fail in association.
  • Fix a problem with scan timeout, could cause a CPE not to connect to a SSID depending on what channel it was on.
  • Increase the time between check of received beacons. To many checks could cause unwanted restarts.
  • Fix a timeout problem when scanning, with many channels to scan the timeout value was to low causing the scan results to be not complete.

 

SU-100 1.5.5.13 – 2012-07-10
  • Resolved an issue with presenting scan results

 

1.5.5.11
  • Resolved a PPPoE problem where multiple session could be started.
  • Resolved an issue where all scan results was not presented, happened when number of SSIDs was 40+.
  • Resolves an issue introduced in 1.5.5.10, causing problems when using WPA.
  • Stability fixes.

 

SU-100 1.5.5.4 – 2011-10-31
  • Varios changes in noise calibration routines, improves stability.
  • Varios fixes in BS-SU communication protocol improve protocol stability.
  • Various fixes in handling Clients PowerSave functionality.
  • Resolved a stack problem, stack to small in some cases, could cause a reboot of unit.
  • Show RSSI for each chain.
Downloads
Important Notes

NOTE! FW version 1.5.7.1 has a known problem when performing site survey when SU is not connected to a BS. SU will fail to scan and reboot. Workaround is to only update the basic tab, the site survey information will be updated since the SU is performing a scan in the background. If SU is connected to a BS it is Ok to perform a SiteSurvey. This issue will be fixed in future upgrade.

SU5XX Series

Current Version

Latest version 1.5.8.13 – 2015-07-09

Download SU5510A-R4 version 1.5.8.13

  • Fixed a bug with the txpower drop down menu in web interface
  • Added Indonesia Country code

SU5510A-r4 1.5.8.11 – 2015-06-16

  • Changed queue size of ethernet interface, could cause reboot at very high load.
  • Corrected a bug that could cause disruption in traffic over radio interface, disruption could continue for 1-5min with out notice in BS or SU.
  • Added more country codes.

SU5510A-r4 1.5.8.2 – 2013-11-12

  • Fix some problems with scanning.
  • Fix a problem when SU is running in bridge mode with QinQ traffic.
  • Changed how radio cards are identified.
  • Added possibility to set channel separation.
  • Added support for Russia.

 

SU5510A-r4 1.5.7.5 – 2013-04-19

  • Fix some problems with scanning.

 

SU5510A-r4 1.5.5.13 – 2012-06-18

  • Resolved an issue with presenting scan results

 

1.5.5.11

  • Resolved a PPPoE problem where multiple session could be started.
  • Resolved an issue where all scan results was not presented, happened when number of SSIDs was 40+.
  • Resolves an issue introduced in 1.5.5.10, causing problems when using WPA.
  • Stability fixes.

 

SU5510A-r4 1.5.5.4 – 2011-10-31

  • Varios changes in noise calibration routines, improves stability.
  • Varios fixes in BS-SU communication protocol improve protocol stability.
  • Various fixes in handling Clients PowerSave functionality.
  • Resolved a stack problem, stack to small in some cases, could cause a reboot of unit.

 

SU5510A-r4 1.5.3.2 – 2011-07-25

  • Corrected a bug causing the “Active Scan” not to show up in the web interface.

 

1.5.3.1

  • Corrected a bug causing the apply button not to work on network tab.

 

1.5.3.0

  • Adjusted the calibration routine.
  • Improved SW watchdog, handles lost beacons better.
  • Allow RCS to handle SU settings.
  • Changed how the DHCP server setup the address range, now follows the LAN address better.
  • Added a delay before reading back the scan result when doing a SiteSurvey.
  • Solves a problem where not all SSIDs where presented.

 

SU5510A-r4 1.5.2.8 – 2011-04-19

  • Increased number of channels reported, not all channels where reported when using 11ABG radio cards.
  • Fix a problem in prioritization, DiffServe setting for Voice queue was wrong.
  • Corrected a problem with CCMP replay check. Sequence numbers could sometimes be wrong.
  • Various stability issues resolved.
  • Adjust QoS (WME) settings for better performance.
  • Improve scanning.
  • Bandwidth settings was not applied correctly.
  • Adjust antenna choice.
Contact us today for pricing, technical support & more info